ST-Connect for MSFS and X-Plane version 1.0.9 Beta (update 30 SEP, 2026)

Stratus Connect update 1.0.9 (30 Sep,2026)

[ IMPROVEMENTS ]

๐ Radio panels (A32-PPCP, A32-PPFO): the two frequency knobs are now

assigned the right way round - the inner knob and the outer knob

each change the part of the frequency they should (Fenix A320 and

FlyByWire A32NX).

๐ A32-PPCP with Fenix A320: the panel backlight now follows the

pedestal light knob in the cockpit.

[ FIXES ]

๐ A32-PPCP: the panel backlight no longer turns itself back on a few

seconds after ST-Connect is closed.

๐ All panels: lights and displays are switched off reliably when

ST-Connect is closed.

[ FIRMWARE ]

๐ A32-PPCP firmware 4. ST-Connect will offer the update when the

panel is connected.

ST-Connect for MSFS and X-Plane version 1.0.8 Beta (update 26 SEP, 2026)

[ NEW FEATURES ]

๐ iniBuilds A380 support for the Airbus overhead panels (A32-OVHL,

A32-OVHM, A32-OVHF). ST-Connect detects the A380 on its own and links

the switches, push buttons, knobs and lights to the aircraft.

ST-Connect for MSFS and X-Plane version 1.0.6 Beta (update 17 SEP, 2026)

[ GENERAL ]
๐ Added COM port settings. You can now tell ST-Connect which COM ports it
must never open. Use this when other cockpit software (MobiFlight and
similar) uses boards with the same USB-serial chips and keeps losing them.
Open it with the new "COM Ports..." button.
๐ Added log files. Every session is now written to
%AppData%ST-ConnectLogs - one folder per run, the last 10 runs are kept.
Each board gets its own file with every command sent and received.
Open the current folder with the new "Logs" button.
๐ Unexpected errors are now recorded in the log file instead of closing the
program silently.

[ SIMULATOR LINK ]
๐ Fixed the panel overwriting the aircraft. When ST-Connect re-connected to
the simulator (for example after a SimConnect drop or an aircraft reload)
it pushed every switch position on the panel into the running aircraft,
which could shut down the ADIRS/IRS in flight. The panel is now pushed to
the simulator only once per board connection, and the ADIRS/IRS selectors
are never pushed automatically.
๐ Added a "Sync panel to sim" button for when you do want the whole panel
pushed to the aircraft on purpose.

ST-Connect for MSFS and X-Plane version 1.0.2 Beta (update 15 SEP, 2026)

AIRBUS OVERHEAD PANEL (Size L)
- Fixed issue with non-functional cabin lights.

BOEING OVERHEAD PANEL (Size M)

Incorrect switch/button assignments
- ENG START L/R knobs: Commands swapped between OFF and GND.
- ENG_START switch: Unresponsive.
- WINDOWS HEAT TEST switch: Unresponsive.