- Version
- Download 330
- File Size 93.09 MB
- File Count 1
- Create Date 20/09/2024
- Last Updated 27/03/2025
Firmware for Controller Box version1.0 -Firmware version 1.0.7 (UPDATE 27 MAR,2025)
Firmware for Controller Box version1.0 -Firmware version 1.0.7 (UPDATE 27 MAR,2025)
**For 402VU Panel ,ECAM
Please update the firmware for Controller Box by FW_MIP_107.bin
**For RMP and ATC/TCAS, ECAM Panel
Please update the firmware for Controller Box by FW_PDP_107.bin
Firmware for Controller Box version1.0 -Firmware version 1.0.6 (UPDATE 26 FEB,2025)
RMP:
-Fixedrotary knob response .
*** Pleas update Firmware Uploader to current version before flash firmware and follow the new manual documents( Included in the download file)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Firmware for Controller Box version1.0 -Firmware version 1.0.5 (UPDATE 24 FEB,2025)
RMP:
-Fixed the slow response of the rotary knob.
-Fixed the issue of displaying numbers and decimals not being correct when changing to HF1,HF2 mode.
-Added display in C-000 and dAtA mode.
ATC:
-Fixed the response speed of 1-0 button presses.
**Note:Since version 1.0.4, 402VU Panel must use separate Controller to use with MIP Controller Box. The supported devices for each Controller Box are:
MIP Controller Box
-Gear Lever
-402VU Panel
-Tripple Gauge
-EFIS Control L,R
-ND
PDP Controller Box
- ECAM Panel
-SWITCHING Panel
-111VU Panel
-RMP Panel
-ATC/TCAS Panel
-Speed Brake Panel
-Flaps Panel
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Firmware for Controller Box version1.0 -Firmware version 1.0.4 (UPDATE 30 JAN,2025)
Since version 1.0.4, 402VU Panel must use separate Controller to use with MIP Controller Box. The supported devices for each Controller Box are:
MIP Controller Box
-Gear Lever
-402VU Panel
-Tripple Gauge
-EFIS Control L,R
-ND
PDP Controller Box
- ECAM Panel
-SWITCHING Panel
-111VU Panel
-RMP Panel
-ATC/TCAS Panel
-Speed Brake Panel
-Flaps Panel
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Firmware for Controller Box version1.0 -Firmware version 1.0.3 (UPDATE 4 OCT,2024)
Bug fix :
ECAM+402VU
- Improved the responsiveness of the ECAM buttons.
- Improved the responsiveness of the Korry button
- Fix the function of the AUTO BRK button.
add function :
ECAM+402VU
- Added control function when pressing the TERR ON ND button with the following modes:(Figure 2)
- MODE 1: When pressed, it will control the ND on the CPT side.
- MODE 2: When pressed, it controls both ND sides.
- MODE 3: When pressed, it will control the ND on the FO side.
- Added functions for users to set the functions of the roraty knob with 3 MODE as follows.(Figure 3)
- MODE 1: Adjust the brightness of the UPPER DISPLAY and LOWER DISPLAY.
- MODE 2: Adjust the brightness of the PFD DISPLAY and ND DISPLAY.
- MODE 3: Adjust the brightness of the FCU LIGHT and PEDESTAL LIGHT
- Added function to turn off device when disconnected from JS-Connect.
- Added function to adjust the brightness of the panel, which can be adjusted via JS-Connect, MSFS Cockpit and Rotary knob on ECAM panel.
